Evaporative (FRP) Cooling towers

Evaporative (FRP) Cooling towers are of vertical induced draft counter flow desingn with uniform water distribution and optimal heat transfer. Towers can be installed independent of wind direction.

Fills

The fill is of rigid Poly Vinyl Chloride (PVC) and is of honeycomb design with very large contact surface area. The fill splits the air and water into several streams, increasing the time of contact and also heat transfer between water and air. The fill is in modules and is packed in the tower casing without any cutting for curves. The air pressure drop through the fill is negligible. The fills are available with flute height of 6mm, 12mm, and 19mm with sheet thickness of 1mm and 1.2mm.

Sprinkler

Automatic rotary sprinkler system made of Nylon 66 material, with rotary head and sprinkler pipe distributes the hot water over the entire space of the filter, sprinkler pippes are non-clogging, require low pressure to operate and assures uniform water flow with minimal operating pump head. the FRP eliminators attached to sprinkler pipe are specifically designed for low pressure drop and minimises the drift loss of water.

Axial Fan

Specially designed energy efficient fans are of induced-draft axial type with adjustable pitch material chosen ar non corrosive of plastic, FRP or aluminium alloy. The high efficiency design ensures low running cost and the lowest possible noise level. Fan blade pitch is factory set and dynamically balanced.

Motors

The motors ar lotally enclosed (IP55), flange type, 415V, 3 ph, 50 Hz, induction weather proof with SS304 extended shaft and are specially designed for cooling tower application.

Technical Specification

Round Type FRP Cooling Tower

Base Model Motor HP / RPM Fan Dia, mm In / Out Size (NB)
HAE 10RT 0.5 / 1440 450 (PVC) 1½” / 1½”
HAE 15RT 0.75 / 1440 700 (PVC) 2″ / 2″
HAE 20RT 1 / 950 750 (NYLON) 2″ / 2½”
HAE 30RT 1 / 950 750 (NYLON) 2½” / 3″
HAE 40RT 1 / 950 850 (NYLON) 3″ / 3″
HAE 50RT 2 / 950 900 (NYLON) 3″ / 3″
HAE 60RT 3 / 950 1160 (AI) 3″ / 3″
HAE 80RT 3 / 950 1160 (AI) 4″ / 4″

Square Type FRP Cooling Tower

Base Model Motor HP / RPM Fan Dia, mm In / Out Size (NB)
HAE 100ST 5 / 950 1400 (AI) 5″ / 5″
HAE 150ST 5 / 950 1400 (AI) 6″ / 6″
HAE 200ST 7.5 / 710 1800 (AI) 8″ / 8″
HAE 250ST 10 / 710 1800 (AI) 8″ / 8″
HAE 300ST 12.5 / 600 2200 (AI) 8″ / 8″
HAE 400ST 15 / 360 2400 (AI) 10″ / 10″
HAE 500ST 20 / 360 3000 (AI) 10″ / 10″

INPUT PARAMETERS REQUIRED FOR SLECTION

Hot Water Temperature

Cold Water Temperature

Wet Bulb Temperature

Water Flow

Check out our work

Take a peek inside our Wonderworld

Application

Chemical Industry, Food & Beverage Industry, GIass Industy, Pharmaceutical Industry, Plastic Industry, Distilleries Breweries / Healthcare / Hospitals, Oil cooler, Metal Spraying, Oncology Machine, Printing Process, PET-Stretch Blow Moulding process chilling, Textile Processing, Welding Machine and many more.